X3 hang in nokia logo successfully flash by cyclone in just a minute
X3 hang in nokia logo successfully flash by cyclone in just a minute
almost 1 minute lang finish flashing agad ang nokia X3 ng customer ko.
super bilis pala nitong cyclone new update sa flashing.
via usb flashing po ang ginawa ko.
here's the logs
 |
Code:
[Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102054100 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001030 CMT_PUBLIC_ID: 3090010EA23A004929919DBA25D4BD9A932C3551 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D CMT_BOOT_ROM_CRC: 67E82268 CMT_SECURE_ROM_CRC: F29CEA60 CMT Ready! Searching for BootCode: DualLine 32Bit RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0x0005317F ROM CMT dwAddr: 0x10004FEC ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E APE Subsystem Not Found Storing NPC... Storing CCC... Storing HWC... CMT VARIANT Not Found Restarting MCU... RPL Saved OK RPL backup thread finished, continuing... Backing up simlock... Sending User Abort Signal... Phone not detected at USB -> User Abort Simlock backup problem -> Phone not detected Backup simlock thread finished, continuing... Pre flash tasks finished, continuing... Processing rm540__08.50.mcusw (CMT)... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600000001020C192102054100 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001030 CMT_PUBLIC_ID: 3090010EA23A004929919DBA25D4BD9A932C3551 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 7B045400E1752022F9EB80B0DEA9C65D CMT_BOOT_ROM_CRC: 67E82268 CMT_SECURE_ROM_CRC: F29CEA60 CMT Ready! rm540__08.50.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6 Searching for BootCode: DualLine 32Bit RAP3Gv40_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.22.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0x0005317F ROM CMT dwAddr: 0x10004FEC ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported RAP3Gv40_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.22.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E Sending Certificates... Certificates OK Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND EraseArea[0,CMT]: 0x00060000-0x0009FFFF, ONENAND EraseArea[0,CMT]: 0x000A0000-0x0025FFFF, ONENAND EraseArea[0,CMT]: 0x003E0000-0x005DFFFF, ONENAND EraseArea[0,CMT]: 0x005E0000-0x010DFFFF, ONENAND EraseArea[0,CMT]: 0x01EC0000-0x01EDFFFF, ONENAND EraseArea[0,CMT]: 0x027C0000-0x02CBFFFF, ONENAND EraseArea[0,CMT]: 0x077C0000-0x07B3FFFF, ONENAND EraseArea[0,CMT]: 0x010E0000-0x01EBFFFF, ONENAND Erase Partition (CMT) Erase Partition (CMT) Erase Partition (CMT) Waiting 320s for erasure finish... Erase taken 0.484s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Writing CMT ADA Certificate... Writing CMT KEYS Certificate... Writing CMT PRIMAPP Certificate... Writing CMT PASUBTOC Certificate... Writing CMT PAPUBKEYS Certificate... Writing CMT RAP3NAND Certificate... Writing CMT UPDAPP Certificate... Writing CMT DSP0 Certificate... Writing CMT MCUSW Certificate... Writing CMT MCUSW1 Certificate... Writing CMT GENIO_INIT Certificate... Writing CMT ISA+DYNSW Certificate... Programming Status OK! All blocks written OK! Time taken 32.0s Flashing Speed: 6842.21 kBit/S Processing rm540__08.50.mcusw (APE)... Processing rm540__08.50.ppm_meaa (CMT)... rm540__08.50.ppm_meaa, Type: Flash Image, Algo: BB5, XSR 1.6 PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x01EE0000-0x027BFFFF, ONENAND Waiting 320s for erasure finish... Erase taken 0.78s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Programming Status OK! All blocks written OK! Time taken 6.437s Flashing Speed: 6988.95 kBit/S Processing rm540__08.50.ppm_meaa (APE)... Processing rm540__08.50.image_meaa_0584295_004 (CMT)... rm540__08.50.image_meaa_0584295_004, Type: Flash Image, Algo: BB5, XSR 1.6 PAPUBKEYS Hash for CMT: CEFA9C410038BD7D17C4C6F107F1EC02C98CA69E Partitioning... Partitioning OK Started group flash erase EraseArea[0,CMT]: 0x02CC0000-0x077BFFFF, ONENAND Erase Partition (CMT) Waiting 320s for erasure finish... Erase taken 1.109s Writing all blocks... Initializing TurboCache... TurboCache Loaded! Programming Status OK! All blocks written OK! Time taken 15.343s Flashing Speed: 6903.98 kBit/S Processing rm540__08.50.image_meaa_0584295_004 (APE)... Restarting MCU... All images processed OK! Processing post flash tasks... Setting Factory Defaults... [Nokia X3 USB Phonet]: Port opened OK! [Nokia X3 USB Phonet]: Port opened OK! [Nokia X3 USB Phonet]: Port opened OK! [Nokia X3 USB Phonet]: Port opened OK! [Nokia X3 USB Phonet]: Port opened OK! Factory defaults OK Reading info... [Nokia X3 USB Phonet]: Port opened OK! MCU Version V 08.50 MCU Date 19-07-10 Product RM-540 (Nokia X3) Manufacturer (c) Nokia IMEI 353770048323845 Mastercode 207245153 IMEI Spare 3A35770084238304 IMEI SV 3335770084238354F0000000 PPM V 08.50, 19-07-10, RM-540, (c) Nokia , MEA CNT Content: meaa_0584295, V 08.50, 19-07-10, RM-540, (c) Nokia PSN CCL503076 Product Code 0598733 Module Code 0204201 Basic Product Code 0578316 PSD 0000000000000000 LPSN 0 RETU 40 TAHVO 00 AHNE 41 HW 5001 RFIC 0831 DSP ICPR91_10w11_2 LCD SEIKO BT 1673-46038 Simlock Server SIMLOCK SERVER Simlock Key 2440700000000000 Simlock Profile 0000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [1,2] State: OPENED Type: GID Data: FFFF Simlock [1,3] State: OPENED Type: GID Data: FFFF Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [2,2] State: OPENED Type: GID Data: FFFF Simlock [2,3] State: OPENED Type: GID Data: FFFF Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [3,2] State: OPENED Type: GID Data: FFFF Simlock [3,3] State: OPENED Type: GID Data: FFFF Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [4,2] State: OPENED Type: GID Data: FFFF Simlock [4,3] State: OPENED Type: GID Data: FFFF Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [5,2] State: OPENED Type: GID Data: FFFF Simlock [5,3] State: OPENED Type: GID Data: FFFF Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [6,2] State: OPENED Type: GID Data: FFFF Simlock [6,3] State: OPENED Type: GID Data: FFFF Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [7,2] State: OPENED Type: GID Data: FFFF Simlock [7,3] State: OPENED Type: GID Data: FFFF Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Read info thread finished, continuing... Post flash tasks finished! Flashing successfully finished!
|
done.
__________________
